Start-Up and Commissioning Strainers are employed during the testing and commissioning phase of construction projects to trap debris as a means of protecting sensitive equipment and/or instrumentation. Typical configurations are Cone (Witch's Hat), Top Hat (Basket) or Plate.
During the construction phase spool pieces will be fitted to the pipeline at specific locations to facilitate the installation of the Strainers. The placement of the temporary strainer spools is usually at a point in the system where critical downstream equipment such as valves, pumps, gauges, instrumentation and other process equipment need to be protected during start-up.
The basic construction is usually perforated metal or welded wire mesh. Finer mesh can be fitted to either the outside or the inside of the basic assembly depending upon the direction of flow and/or the method preferred to capture and remove collected debris. The Strainers can be installed horizontally or vertically
Other Strainer types that can be used during the start-up and commissioning phase of a project are: Bathtub Strainers, Wedge Wire Flat Plate Strainers, Basket Strainers, Tee Strainers, Diaphragm Strainers and Reinforced Plate Strainers.
Standard Open Areas
100%, 150%, 200% and 300%
Standard Pressure Ratings
150lb, 300lb, 600lb, 900lb and 1500lb (Flat Face, RF and RTJ flange finishes)
Strainer Size, Rating, Open Area % and Filter Aperture is stamped on the handle.
Materials of construction
Carbon Steel, 304 & 316 Stainless Steel and Duplex Stainless Steel
Standard Size Range
¼” (6mm) through 48” (1,200mm)
Additional innovative design & performance features such as: high flow capacity screens, pleated baskets, baskets with rupture protection, high strength construction, improved dirt holding capacity baskets, multi-level filtration and other options are available.
With over 30 years experience, HORIZON Industrial provides innovative filtration solutions for customers across all industries. All Strainers are provided with code and statutory compliance along with stringent quality control in accordance with recognised standards and certifying authorities.