• 002 strainer simplex
  • 001 pig handling
  • 003 pipeline pig
  • 004 Strainer bathtub
  • 005 strainer fabricated
  • 006 pigging services
  • 007 strainers fabricated
  • 008 pig launcher
  • Simplex Strainer
  • Pig Handling
  • Pipeline Pig
  • Bathtub Strainer
  • Fabricated Strainer
  • Pigging Services
  • Fabricated Strainer
  • Pig Launcher

Check Valves

Posted in Pipeline Equipment

HORIZON Industrial is the exclusive distributor of IFC Check Valves. These valves are designed specifically to meet the stringent requirements for positive shut-off in HVAC, Oil & Gas, Water & Wastewater and Industrial applications.

Features

  • Dual Disc (including Retainer-less Type) are available in Wafer for fitting between FF or RF type Flanges
  • Silent Check Valves are available in Threaded, Socket Weld, Butt Weld, Wafer or Flanged types
  • Valves sizes 6” and larger come complete with a tapping point for fitting a Lifting Lug
  • Standard resilient Buna-N or EPDM seats are provided. Other seating materials are available
  • PTFE Thrust Washers are standard
  • Testing is in accordance with API 598
  • All valves are fitted with independent springs that optimize the closing rates of each valve plate whilst minimizing spring stress
  • The Seat design allows the discs to lift then swing to minimize seat wear
  • Size Range: 1/4” (8mm) up to 60” (1500 mm)

Materials of Construction

  • Cast Iron
  • Ductile Iron
  • Bronze
  • Carbon Steel
  • Stainless Steel and others

Butterfly Valves

Posted in Pipeline Equipment

HORIZON Industrial is the exclusive distributor of IFC Butterfly Valves. The IFC series BII25W/L Butterfly Valve is available in sizes 2” through 48”  and either Wafer or Lug type body design. These valves are designed specifically to meet the stringent requirements for positive shut-off in HVAC, Oil & Gas, Water & Wastewater and Industrial applications.

Construction comprises Cast Iron or Ductile Iron bodies with Stainless Steel Shafts. Discs and Seats are available in a wide range of materials to suit most applications. Designed in accordance with API 609 & MSS-SP-67, the valves are suitable for use with ANSI 125lb or ANSI 150lb Flanges.

2” through 12” are rated for 200 psig and 150 psig for sizes 14” through 48”

Pipe Repair Clamps

Posted in Pipeline Equipment

HORIZON Industrial is the regional distributor for Huwa Pipe Repair Clamps.  

The range includes:

  • Low & Medium Pressure Clamps
  • High Pressure Clamps

Applications for Pipe Repair Clamps cover all industries including:

  • Petrochemical
  • Chemical Processing
  • Oil & Gas
  • Pulp & Paper
  • Commercial/Industrial Construction
  • Metals Manufacturing
  • Mineral Sands
  • Fire Services
  • HVAC
  • Mining
  • Water & Wastewater
  • Power Generation

Inflatable Gas Bags | Pipe Stoppers | Pipe Plugs | Pipe Bladders | Vapour Barrier Bags

Posted in Pipeline Equipment

HORIZON Industrial is the authorised representative for Inpipe Products' range of specialty pipeline equipment.

Pipe Plugs

Our Pipeline Plugs range includes Low, Medium and High pressure Pipe Plugs. All of these plugs can be used in hydrostatic test applications when a weld or joint needs hydro testing but no end flanges are available. Traditionally, temporary flanges or pipe caps would be welded to the pipe and removed after testing. Using HP Pipe Plugs reduces the cost of materials and labour as a result.

High Pressure Pipe Plugs

  • Size range: ½” through 36” (larger upon request)
  • Can supply in hydraulically actuated models
  • Can be manufactured to suit specific pipe diameters
  • Instructions and test certificates supplied
  • Patented Posi-seal technology
  • Can retain pressures of up to 230 bar (higher upon request and depending on size)
  • Hardened steel vice jaws
  • End hub accepts male or female test connection
  • High alloy materials are available
  • Available for horizontal and vertical applications
  • Requires no special tools

Medium Pressure Pipe Plugs

  • Size range: 4” through 48” (larger upon request)
  • Single point of inflation
  • Can be manufactured to suit specific pipe diameters
  • Can be used in Steel, DICL, PVC, GRP, PE, Cement, Cast Iron and other pipelines
  • Instructions and test certificates supplied
  • Patented Posi-seal technology
  • Can retain pressures of up to 10 bar (higher upon request and depending on size)
  • Circumferential high friction bands prevent differential pressure moving the plug
  • End hub accepts male or female test connection
  • MP Pipe Plug can be used in a number of basic pig launching operations to avoid have to fit launchers or special fittings
  • Available for horizontal and vertical applications
  • Requires no special tools

Low Pressure Pipe Plugs

  • For temporarily sealing off pipelines, drains, sewers and vessels
  • Size range: 4” through 48” (larger upon request)
  • Temporary isolation during inspection or repair work is undertaken
  • Can be used in Steel, DICL, PVC, GRP, PE, Cement, Cast Iron and other pipelines
  • Can be manufactured to suit specific pipe diameters
  • Instructions and test certificates supplied
  • Patented Posi-seal technology
  • Can retain pressures of up to 2 bar (higher upon request and depending on size)
  • End hub accepts male or female test connection
  • Available for horizontal and vertical applications
  • Requires no special tools

Isolation Tools & Weld Testers

Posted in Pipeline Equipment

HORIZON Industrial is the authorised representative for Inpipe Products range of specialty pipeline products.

Isolation Tools

The Dual Tool is used when a new flange must be welded to existing pipe work which has been carrying Hydrocarbons, Gases and other volatile media. In this instance a safe working environment must be created before any ‘hot work’ can commence. The role of the Dual Tool is primarily to provide a safe working environment. As a secondary function the Dual Tool also provides isolation via a combination of inflatable tyres and water or, inert gas. Once the weld has cooled, the tool can be re-positioned and the central cavity used to hydrostatically test the new weld without the need to fill the entire pipe.

The Dual Tool was designed at the request of major refineries as a result of experiencing a numerous accidents. The Dual Tool is now specified by major refineries around the world.

Features

  • Patented Posi-seal technology
  • Double isolation via two tyres
  • Certified to hold a differential pressure of 3 bar g
  • Central cavity can be used to hydrostatically test to 30 bar g (76.5 bar g on request)
  • Central by-pass facility to vent gasses
  • Tool provided with stainless steel braided hoses, gauge and isolation valve
  • 4” through 42”

Weld Testers

Inpipe Weld Testers are used to hydrotest the integrity of a weld. There are two primary weld tester designs; Flanged Weld Tester and Internal Weld Tester.

Typically supplied with a patented posi-seal, the weld testers can also be supplied with patented tyre type seals, ideal for testing when ovality and heavy pitting are encountered.

Features

  • Patented Posi-seal technology
  • Vent and drain bleeder plug incorporated as a standard feature
  • End of hub accepts male or female test connection
  • Self-energising seals
  • Size range ½” – 48”
  • Standard pressure up to ANSI 900lb (available up ANSI 2500lb on request)
  • Independent hydraulically actuated models available
  • Horizontal or vertical applications